Cub Cadet Specialties

Hydrostat Parts & Battery Hold-Downs

Today is:





Click the Parts Lookup Button BELOW to make sure you have the right PART NUMBER.

Click the Thumbnail to View Large Image

Stock Photos Used

SHIPPING $10.00 PER ORDER to the lower 48 States.
International and Canadian orders Email for shipping cost before ordering.

OEM Hydro Control Linkage ball joint PN/ IH-400722-R1 USE 923-3011

Fits most all Cub Cadet hydro linkages

IH 400722 R1

 $26.77

OEM Hydro Control Linkage ball joint PN/ IH-25472-R1 USE 923-3012

Fits most all Cub Cadet hydro linkages

IH 25472 R1

$30.25

Friction Bushing Speed Control Lever-PN/ IH-680521-R1 use IH-680521-R2

 Fits 109,129,149

IH 680521 R1

$10.00

Bell Washer for the Speed Control Lever - PN/ 736-3022 USE 936-3022

 Fits 109, 129, 149, 169 & many others

$5.00

Friction Disc for the Speed Control Lever - PN/ IH-106275-C1 723-3013 923-3013

 Fits 109, 129, 149, 169 & many others

$0.00

IH - Hydraulic Lift Knob PN/ IH-396454-R1

IH 396454 R1

$38.00

IH - Hydro speed control Shifter Knob PN/ IH-61129-C1 720-3000 USE 920-3000

IH 61129 C1

$8.00

NOS OLD STYLE Egg shape Hydro speed control Knob PN/ IH-61129-C1, 720-3000 USE 920-3000

Brass thread insert

IH 61129 C1

$12.00

  Used Handle detent stop with NEW Fluted Knob PN/ 731-3007 and 721-3003

$0.00

CORRECT Hydro forward reverse handle half dog point set screw PN/ IH-192454

 Fits 105, 107, 109, 125, 127, 129, 147, 149, 169

$0.60 Ea.

  Rear end Plate Gasket For all Cast Iron Rear Ends PN/ IH-350837-R2

This is a new OEM Cub Cadet Case IH part

IH 350837 R2

$14.00

  Rear end Cover Plate Gasket For all Aluminum Rear End Machines

PN/ IH-106899-C1 use 721-3015 or 921-3015

IH 106899 C1

$15.80

  NOS Cover Plate and Gasket For Aluminum Rear End Machines PN/ IH-106900-C1 USE 703-0905

$0.00

  Axle carrier gasket for most Cub Cadet garden tractors PN/ 721-3014

$9.49 Ea.

  Axle seal fits most cub cadets except 61-63 Original PN/ IH-381721-R91  921-0187  721-0187

IH 381721 R91

$9.51 Ea.

 

  Relief valve dump handle grommet PN/ IH-117960 USE 735-3008

Fits 70, 71, 72, 73, 80, 100, 102, 104, 105, 106, 107, 108, 109, 122, 123, 124, 125,
126, 127, 128, 129, 147, 149, 169, 800, 1000, 1200, 1250, 1450, 1650, 182, 282, 382, 383

IH 117960

$0.75 Ea.

  Self-unloading hydro release valve PN/ IH-394872-R91 USE SU-9500085P

This part replaces: IH-123481-C1  IH-123481-C2  IH-394872-R91  SU 9500085 P

IH 394872 R91

$98.00 Ea.

  Manual unloading hydro release valve PN/ 3103132

$98.00 Ea.

  Sauer Danfoss Relief shim kit PN's/ IH-398569-R1 GW-1736944 1728234 1728244 USE SU-9510447

IH 398569 R1

$31.55 Ea.

Charge pump relief valve cone PN/ IH-394869-R1 IH-538590-R1 USE SU-3100053

Fits all hydros

IH 394869 R1 IH 538590 R1

$29.34

Charge pump port plate gasket Sauer Danfoss brand PN/ IH-398570-R2 USE SU-3101820

Fits 105, 123, 125

$10.90

Hydrostatic 90 Degree elbow PN/ IH-9402944 USE IH-218-475

Fits 109 129 149

7/8-14 37 Deg Hyd Flared Tube, 90 Deg | (For tractors w/serial no. 468990 & below)

$23.28

Hydraulic Tube Assembly PN/ IH-117568-C1 727-3008 USE 927-3008

Fits Cub Cadet 109 129 149 169 1210 1282 680 682 782 784 1250 1450
 1650 1710 1711 1712 1912 1914 982 984 986

IH 117568 C1

$51.26

Hydraulic return Tube Assembly PN/ IH-135524-C1 USE 727-3001

Fits 782 784 1211 1512, 882, 782-Diesel, 1711, 1712, 1811 1812

IH 135524 C1

$65.40

Hydraulic Tube Assembly nut PN/ IH-56446-D, 712-3028 USE 912-3028

Fits 109, 1210, 1282, 680, 1250, 129, 1450, 149, 1512, 882, 782-Diesel, 782D, 882, 1650,
169, 1710, 682, 1711, 1712, 782, 784, 1912, 1914, 982, 984, 986

 $32.44

Hydraulic Tube Assembly O-ring PN/ H-364885-R1 721-3005 USE 921-3005

Fits 105, 107, 109, 1210, 1282, 680, 1211, 123, 125, 1250, 127, 129, 1340, 1450, 147,
149, 1512, 882, 782-Diesel, 1541, 1572, 1650, 169, 1710, 682, 1710, 711, 1712,
782, 784, 1772, 1782, 1810, 1811, 1812, 1860, 1862, 1864, 1872, 2072, 1882,
1912, 1914, 2082, 2084, 2086, 2135, 2145, 2165, 2182, 2185, 2284, 4814R,
4815F/Pro, 4816F, 5416R, 5418F, 982, 984, 986

$1.00 Ea.

Hydraulic lines bulkhead fitting PN/ 703-3184 USE 703-3184-0498

Fits 343 Front hitch

$44.00 Ea.

Center housing Hydrostat Oil Filter nipple pipe PN/ IH-394868-R1 USE SU-3101069

Fits 105, 107, 109, 1210, 1282, 680, 1210, 123, 125, 1250, 127, 129, 1450, 147, 149, 1512, 882,
782-Diesel, 782D, 882, 1650, 169, 1710, 682, 1711, 1712, 782, 784, 1912, 1914, 982, 984, 986

$23.39

  Hy-tran Premium Hydrostatic and Gear drive rear end fluid. One Gallon PN/ 73344265

Use only Hytran fluid for your Cub Cadet.
Takes approx 7qts to change hydro fluid and filter.

$48.00 ea.

Cub Cadet OEM Hydrostat Oil Filter PN/ IH-395789-R2 723-3014 USE 923-3014

Fits

105 107 109 123 125 127 129 149 169 680 682 782 782D 784 882 982 984 986 1204 1210 1211 1282 1250 1340 1440 1450 1512 1541 1572 1641 1650 1710 1711 1712 1772 1782 1810 1811 1812 1860 1861 1862 1863 1864 1782 1882 1872 1912 1914 2072 2082 2084 2086 2182 2284 2135 2145 2155 2164 2165 2166 2176 2185 2186 2518 3184 3185 3186 3204 3205 3206 3208 3225 3235 3240 5234 5254 5264 6284 7252 7254 7264 7284 7304

$17.83

OEM supplier to Cub Cadet Hydrostat Oil Filter PN/ IH-395789-R2 723-3014 USE 923-3014

 

Fits

105 107 109 123 125 127 129 149 169 680 682 782 782D 784 882 982 984 986 1204 1210 1211 1282 1250 1340 1440 1450 1512 1541 1572 1641 1650 1710 1711 1712 1772 1782 1810 1811 1812 1860 1861 1862 1863 1864 1782 1882 1872 1912 1914 2072 2082 2084 2086 2182 2284 2135 2145 2155 2164 2165 2166 2176 2185 2186 2518 3184 3185 3186 3204 3205 3206 3208 3225 3235 3240 5234 5254 5264 6284 7252 7254 7264 7284 7304

 

Replaces

Ariens 03192800, Bobcat 48045B, Case H334540, Clark Equipment 1804366, Cub Cadet 723-3014, Cub Cadet 923-3014, Cub Cadet IH-395789-R2,

 Hitachi AM39653, John Deere AM39653, New Holland TR98D3596, Toro 106-5830, Toro 108335, Toro 79-5270

$14.40

Cub Cadet Kohler Oil Filter PN/ KH-52-050-02 USE KH-52-050-02-S

$11.31

  Synthetic Blend Drive System Fluid - One Quart PN/ 737-3120 , 737-3055 USE 490-000-C051

$19.40ea.

  Synthetic Blend Drive System Fluid - One Gallon PN/ 737-3054 USE 737-3121

$66.40ea.

  Cub Cadet hydraulic transmission fluid - One Quart PN/ 737-3025

$11.00ea.

  Original Cub Cadet Low Ash Engine Oil- One Quart PN/ 737-3029

Use only genuine Low Ash Oil for your Cub Cadet.

$9.00 ea.

  CASE/IH replacement for Low Ash Engine Oil- One Quart PN/ IH-407340-R3 use 73344254

Case-IH spec sheet

$9.00 ea.

  NOS Kohler Winter blend 5W30Engine Oil PN/ KH-25-757-03

NLA from Kohler

$11.00 ea.

New Hydro-Gear Gerotor & Housing Assembly PN/ 50761 USE HG-50761

Fits 3165 3184 3185 3186 3204 3205 3206 3208 3225 3235 3240 GT3100
GT3200 GT3204 GT3235

$119.67

NOS Sundstrand High Capacity BDU 15 Ported Hydro pump assembly PN/ 717-3311 USE 917-3311

Also comes with NOS DRIVE SHAFT PUMP Adapter PN/ 748-3038 already installed

Fits 1340 1541 1782 1860 1862 1864 1882 2082 2084 2086 2182 2284

1572 1772 1810 1872  2072 1912 1914 982 984 986 and others if you change the flanges/shaft

Will work with all pre 1985 Cubs with the right pump adapter and shaft.
Give your old narrow and wide frames more hydrostatic power.

$0.00

New TANK Hydro Gear PG-5KCC-NW1X-XXXX PN/ 01009531 USE 01009531P

Fits M60-KW LC (53AB5GFX750) (Tank) 29HP Kawasaki
M60-KW LC (53BB5GFX750) (Tank) 29HP Kawasaki DFI V-Twin OHV L.C.
M72-KW LC (53AB5GFZ750) (Tank) 29HP Kawasaki DFI V-Twin OHV L.C.

$957.00

New Hydro Gear transmission assembly wheel motor final drive  PN/ 618-3218B USE 918-3218B

PN's/ 01002604 01002604P 01004640P 01007264 01007264P 618-3218B 918-3218B

Fits 3654, 53AB5B8K100 ZT54
3660, 53AB5B8J100 ZT60
M48-KHS (53AB5B5M150) (Tank) 18 HP Kohler, 53AB5B5M150
M48-KHS (53AB5B5M750) (Tank) 18HP Kohler, 53AB5B5M750
M48-KW (53AB5DAV150) (Tank) 19 HP Kawasaki, 53AB5DAV150
M48-KWS (53AB5D4M150) (Tank) 17 HP Kawasaki, 53AB5D4M150
M50-KHS (53AB5BBP750) (Tank) 23HP Kohler V-Twin OHV, 53AB5BBP750
M54-KW (53AB5DBW150) (Tank) 23 HP Kawasaki, 53AB5DBW150
M60-KW (53AB5DBX150) (Tank) 23 HP Kawasaki, 53AB5DBX150

$1150.00

EASY SWAP HYDRO Cooling Fan replaces both fans listed below PN/ IH-547749-R1 and IH-394065-R92

 Fits 105, 107, 123, 125, 127, 147, 109, 129, 149, 169, 1250, 1450, and 1650

 

Fits all 5/8 in drive shaft tractors

 

                    Replace that broken Hydro fan on your Cub Cadet Hydrostatic tractor without removing the driveshaft!

 

Detailed instructions included for all tractors.

$38.00

Narrow Frame Hydro Cooling Fan PN/ IH-394065-R92

Fits 105, 107, 123, 125, 127, and 147

IH 394065 R92

$19.79

Wide frame Hydro Cooling Fan PN/ IH-547749-R1

 Fits 109, 129, 149, 169, 1250, 1450, and 1650

IH 547749 R1

$16.26

82 Series and Others Hydro Cooling Fan PN/ IH-135369-C1 Use 931-3009

 Fits 1210, 1282, 680, 1211, 1512, 882, 782D, 1541, 1710, 682, 1711, 1712, 782, 784, 1810, 1811, 1812, 1860

IH 135369 C1

$22.48

82 Series and Others Hydro Cooling Fan PN/ IH-140311-C1 731-3013 USE 931-3013

 Fits 982 984 986 1912 1914 1872 2072

$41.83

Hydro Cooling Fan PN/ 731-3095 USE 931-3095

 Fits 1340 1440 1541 1641 1782 1860 1861 1863 1864 1882 2082 2084 2086
2130 2135 2140 2145 2150 2155 2160 2164 2165 2182 2185 2185 2284
3165 3185 3186 3205 3225

$23.53

Hydro Cooling Fan Retaining Ring PN/ 716-3001 USE 916-3001

$3.24 Ea.

CUB CADET  Quiet Line ISO Motor/Engine Mount Kit Per Set PN/ IH-61509-C2 Use 759-3952

Takes 4 to do the entire engine

Fits 800, 1000, 1200, 1250, 1450, 1650, 482, and 1210

$32.00 Ea.

NEW and Improved Quiet Line ISO Motor/Engine Mounts Set of 8

Replaces PN/ IH 61509 C2 Use 759-3952

Fits 800, 1000, 1200, 1250, 1450, 1650, 482, and 1210

Direct replacement for original ISO mounts.

$38.00

ISO Motor/Engine Snubber PN/ 722-3004, 922-3004, IH-135640-C1 USE IH-61510-C1

Fits 482, 680, 800, 1000, 1100, 1200, 1204, 1210, 1211, 1282, 1340, 1250, 1450, and 1650

$19.87 Ea.

  Cork gasket to go between hydro and rear end housing PN/ 721-3004 IH-394092-R1 USE 921-3004

IH 394092 R1

$7.64 Ea.

  SU-15 Hydrostatic Pump rebuild kit  PN/ 9510172

$112.00 Ea.

  NOS SU-15 transmission Hydraulic Motor shaft PN/ IH-405180-R1 USE SU-3101752

Fits 105, 107, 109, 1210, 1282, 680, 1211, 123, 125, 1250, 127,129, 1340, 1450, 147, 149, 1512, 882,
782-Diesel, 782D, 1541, 1650, 169, 1710, 682, 1711, 1712, 782, 784, 1711, 1712,
1810, 1811, 1812, 1860, 1862, 1864

$210.00

  NOS Hydrostatic Pump Trunnion shaft  PN/ IH-394879-R92, SU-3103181 USE SU-3103181P SOLD OUT

Fits 105, 107, 109, 123, 125, 127, 129, 147, 149, 169, 680, 682, 782, 782D, 784, 882, 982, 984, 986, 1210, 1250, 1282, 1340,
1450, 1512, 1541, 1572, 1650, 1710, 1711, 1712, 1772, 1782, 1810, 1811, 1812, 1860, 1861, 1862, 1863, 1864,
 1872, 1912, 1914, 2072, 2082, 2084, 2086, 2182, 2284

$0.00 Ea.

  NOS Pump Input seal retainer Modification kit  PN/ CC-243

Fits 1862, 1782, 2082, 2182

Keeps the pump shaft seal from blowing out

$26.00 Ea.

  Pump lip seal  PN/ 1185296, SU-9008000-7505, GW-1185296, GW-B1185296 USE SU-5000174

Fits 1340, 1541, 1572, 1772, 1860, 1862, 1864, 1872, 1882, 2072, 2082, 2084, 2086, 2182, 2284

Other superseding PN's 1728240, 1728248, SU-9008000-7505

$23.01

   Hydrostatic Pump Lip Seal  PN/ IH-383534-R91 Use IH-383534-R92

For use in tractors (Serial No. 592014 & below)

$11.42 Ea.

   Hydrostatic Pump Lip Seal  PN/ IH-123252-C91, GW-1728230, SU-9008000-6701 USE SU-11156097

For use in tractors (Serial No. 592015 & above)

$22.00 Ea.

  Hydrostatic Pump Lip Seal  PN/ 721-3032  921-3032  IH-394847-R91  SU-9008000-6201

$10.09 Ea.

   IH   Charge pump Housing O-Ring  PN/ IH-23707-R1

IH 23707 R1

$7.20 Ea.

  NOS Charge pump kit  PN/ IH-142490-C91, IH-538594-R1, IH-538595-R1, IH-1260938-C91, SU-9510405-0003, SU-9510405-0003 USE SU-11060903

Fits, 109, 1211, 1250, 129, 1450, 149, 1512, 882, 782-Diesel, 782-D,
1541, 1572, 1650, 169, 1711, 1712, 782, 784, 1711, 1712, 1772, 1782,
1811, 1812, 1862, 1864, 1872, 2072, 1872, 1882, 1912, 1914, 2082, 2084,
2086, 2182, 2284, 982, 984, 986

$582.00

   Charge pump kit  PN/ SU-9510405-0003 USE SU-11060903 SOLD OUT

Fits, 109, 1211, 1250, 129, 1450, 149, 1512, 882, 782-Diesel, 782-D,
1541, 1572, 1650, 169, 1711, 1712, 782, 784, 1711, 1712, 1772, 1782,
1811, 1812, 1862, 1864, 1872, 2072, 1872, 1882, 1912, 1914, 2082, 2084,
2086, 2182, 2284, 982, 984, 986

$0.00 Ea.

   IH   Trunion Shaft Seal Retaining Washer  PN/ IH-398574-R1 Use SU-9009625-6904

IH 398574 R1

$0.00 Ea.

  Internal Snap Ring  PN/ IH-55271-C1 USE 716-04098

IH 55271 C1

$2.50 Ea.

  Cub Cadet Transmission Housing Gasket PN/ IH-394865-R1 Use SU-3102875P

IH 394865 R1

$28.00 Ea.

  Hydro Trunion Repair Slot

Repair your worn trunion slot without removing the arm from the tractor.

Use this piece to mark your old one, cut it off and weld this one in it's place.

$9.00

  Hydrostatic Hydro Small damper spring PN/ IH-394039-R1 USE 732-3012 USE 932-3012

 

A must when repairing a lazy hydro

$7.00

  Hydrostatic Hydro Large damper spring PN/ IH-394826-R1 USE 732-3013 USE 932-3013

 

A must when repairing a lazy hydro

$5.50

  Hydro spring guide pins PN/ IH-394041-R1 711-3033 USE 911-3033

$20.28 Set

Hydro Release Lever W/New pin  PN/ IH-545728-R1 TEMP OUT

Fits everything the one below doesn't.

Built much heavier/stronger than original

IH 545728 R1

$0.00

 IH Cub Cadet  Hydro Release Dump Lever PN/ 703-0310

Fits 105, 107, 123, 125, 127, 147, 80, 282, 382, 1110, 1020, 1220, 1320, 1330, 1420, 1430, 1610, 1620, 1720, 1730

$22.00

 IH Hydro Release Lever Roll Coiled Spring Pin PN/ IH-18607-R1 USE 715-3008

IH 18607 R1

$1.00 Ea.

IH - Hydro damper plate & Speed Control Cam Assembly Shims .005

Tighten up both to help stop that hydro lurch

Click here to see the fix to the problem

$1.00 Ea.

IH - Hydro damper plate & Speed Control Cam Assembly Shims .007

Tighten up both to help stop that hydro lurch

Click here to see the fix to the problem

 $1.00 Ea.

IH - Hydro damper plate & Speed Control Cam Assembly Shims .010

Tighten up both to help stop that hydro lurch

Click here to see the fix to the problem

$1.00 Ea.

Snap Ring for hydro plates below PN/ IH-267805-R1, IH-269174-R1, IH-324050-R1, FF-1491, 716-0115, 916-0115

$1.60

Snap Ring for hydro plates below PN/ 706-16058, 706-500367, 706-4KHDM027, 706-9616, 716-0865

 $2.15

Hydro control friction disc washer PN/ IH-394057-R1 IH-394057-R2 723-3019

Fits 105, 107, 123, 125, 1250, 127, 1450, 147, 1650, 282, 382 Gear & 383 Hydro, 80

$0.00

Hydro damper plate PN/ 703-0194 IH-144749-C91 USE 903-0194

Replace your worn plate for improved hydro performance

Fits 105 Thru 2284 Hydros

IH 144749 C91

$106.34

Cam Pivot Bushing PN/ IH 394048 R1 Cam Pivot Bushing PN/ IH-394048-R1

Replace your worn plate for improved hydro performance

Fits 105 Thru 2284 Hydros

IH 394048 R1

$12.95

Speed Control Cam Assembly PN/ IH-528868-R1 USE IH-548057-R2

Replace your worn plate for improved hydro performance

Fits 105, 107, 109, 123,125, 127,147, 129, 149, 169, 1250,1450, 1650

IH 548057 R2

$86.30

Speed Control Cam Assembly PN/ IH-135310-C2 USE 703-0198A

Replace your worn plate for improved hydro performance

Fits 682 782 982 1340 1541 1782 1860 1861 1863 1882 2082 2084 2086 2182 2284

IH 548057 R2

$70.29

Hydro Cam Pivot Bracket PN/ IH-548055-R1 USE IH-548055-R2

Fits 107, 109, 127, 129, 147, 149, 169, 1450, 1650

IH 548055 R2

 $88.59

Hydro Cam Pivot Bracket PN/ 703-0196

 NLA from Cub Cadet

Fits 1210, 1282, 680,1512, 882, 782-Diesel,1710, 682, 1711, 1712, 782, 784, 1912, 1914, 982, 984,  986, 1210, 1211, 1340, 1541, 1572, 1772, 1782, 1810, 1811 & 1812, 1860, 1862, 1864, 1872 & 2072, 1882, 2082, 2084, 2086, 2182, 2284

$60.00

Upper Suction Tube  PN/ IH-547139-R1

Fits 109,129,149

IH 547139 R1

$38.55

Front coupler plugs for above couplers PN/ 731-3022

These are the original front coupler retainers for Cub Cadet garden tractors

$14.43 Ea.

NOS Lower Suction Tube  PN/ IH-547138-R1 or IH-547138-R2 SOLD OUT

Fits 109,129,149

IH 547138 R1 or IH 547138 R2

$0.00

IH NOS OEM Hydro control handle assembly PN/ IH-61464-C1 USE IH-61464-C2

Replace your worn handle for improved hydro performance

Fits 1250 1450 1650

IH 61464 C1

$120.00

NOS Hydro control handle cross shaft assembly PN/ 703-1838

Fits

1340, 1440, 1541, 1641, 1782, 1860, 1861, 1862, 1863, 1864, 1882, 2082, 2084, 2086, 2182, 2284

$0.00

  Used Hydro Speed Control Handle  P/N- IH-401388-R2 USE IH-401388-R3 SOLD OUT

Fits 105, 107, 109, 125, 127, 129, 147, 149, 169

$0.00

IH - Hydro control shaft PN/ IH-106220-C1 SOLD OUT

 Fits 109, 129, 149, and 169

IH 106220 C1

$0.00

Hydrostatic suction Tube Assembly kit PN/ IH-394827-R21

Fits 105 107 123 125 127 147

IH 394827 R21

$0.00

New Old Stock Sauer Danfoss Model 90-1270 BDU 15 Ported Hydro pump PN/ 717-3034 USE 917-3034

High Capacity

Also comes with a PUMP Shaft for older Cub Cadets PN/ SU-3101867

This lets you use this SUPER PUMP in all pre 1985 Cubs Narrow frame and Wide frame tractors

NLA from anybody but Cub Cadet Specialties

Fits 982 984 986 1340 1541 1572 1772 1782 1860 1862 1864 1872 2072 1882
1912 1914 2082 2084 2086 2182 2284
 and others if you change the pump shaft

$0.00

With shaft

$0.00

W/O shaft

New Battery hold down includes bolts PN/ IH-376293-R2 703-3149 USE 703-3149A

Fits 70, 71, 72, 73, 100, 102, 104, 105, 106, 107, 122, 123, 124, 125, 126, 127, 147

 (excluding early 100's with large battery box.)

$0.00

NEW OLD STOCK Hydrostatic suction Tube Assembly kit PN/ IH-394827-R21

Fits 105 107 123 125 127 147

IH 394827 R21

$0.00

NOS  Hydrostatic Linkage Field Change Package PN/ IH-8007448-R1

Fits 109, 129, 149 Fix that sloppy Hydro Lever!

IH 8007448 R1

 $0.00

Used Hydrostatic suction Tube Assembly kit PN/ IH-394827-R21

Fits 105 107 123 125 127 147

IH 394827 R21

$0.00

NEW Quiet Line SOLID Motor/Engine Mounts Set of 4

Replaces PN/ IH 61509 C2 Use 759-3952

Direct replacement for original ISO mounts.

Solid motor mounts that go between the motor plates and frame. Grade 8 hardware and Nylock nuts.

$0.00

  Power Steering and front hydraulic port kit PN/ 717-3025 and related parts SOLD

What's pictured is all that's included

$0.00

Click Below to Email Us:

DISCLAIMER

Cub Cadet Specialties is not affiliated with or sponsored by MTD Products Inc, which owns the Cub Cadet trademarks. MTD Products Inc.
is not responsible for the accuracy or quality of the material presented on this website.

 For more information concerning the latest in Cub Cadet tractors, please visit www.cubcadet.com

All items marked CUB CADET are true CUB CADET/MTD made parts.
All others are replacement parts unless otherwise specified.
All parts come unpainted unless OEM Cub Cadet part, or noted otherwise

This website contains no material provided by MTD Products Inc, is not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks.
It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at:
www.mtdproducts.com/equipment/

The information and opinions expressed on this website, including the bulletin boards and/or chat rooms hosted on this site are the responsibility of the website's owner and/or visitors,
and do not represent the opinions of MTD Products Inc.

Cub Cadet Specialties offers new and used vintage IH International Harvester Lawn mower, garden tractor parts, Cub Cadet Parts,
Diagrams, mowers, attachments and sell Genuine OEM parts for Cub Cadets

We also carry Kohler engine parts, OEM Seats, Brinly Sleeve hitch and Cat. 0 3 point hitches, Duff Norton electric lift parts,
Case IH and Cub Cadet paint and decals.

IH Cub Cadet Mufflers, exhaust system parts as well as drive clutch and PTO clutch parts.
Many NOS New Old Stock and hard to find Cub Cadet parts.

We also have many Exclusive parts not offered anywhere but on our site for Cub Cadets

 

Click Here for Other Helpful Websites

Privacy Statement & Terms of Service

Copyright CC Specialties. All rights reserved. 2003-2021

* Discounts only apply to the lower 48 States.